Code

Add to the main application source file, outside of any functions:
#define AES_EXAMPLE_REFBUF_SIZE 4

uint32_t ref_plain_text[AES_EXAMPLE_REFBUF_SIZE] = {
    0xe2bec16b,
    0x969f402e,
    0x117e3de9,
    0x2a179373
};

uint32_t ref_cipher_text_ecb[AES_EXAMPLE_REFBUF_SIZE] = {
    0xb47bd73a,
    0x60367a0d,
    0xf3ca9ea8,
    0x97ef6624
};

const uint32_t key128[4] = {
    0x16157e2b,
    0xa6d2ae28,
    0x8815f7ab,
    0x3c4fcf09
};
Add to the main application source file, outside of any functions:

/* Output data array */
static uint32_t output_data[AES_EXAMPLE_REFBUF_SIZE];
/* State indicate */
volatile bool state = false;
struct aes_config g_aes_cfg;
struct aes_module aes_instance;
struct usart_module usart_instance;
Copy-paste the following setup code to your user application:
static void configure_usart(void)
{

    struct usart_config config_usart;
    usart_get_config_defaults(&config_usart);
    config_usart.baudrate    = 38400;
    config_usart.mux_setting = EDBG_CDC_SERCOM_MUX_SETTING;
    config_usart.pinmux_pad0 = EDBG_CDC_SERCOM_PINMUX_PAD0;
    config_usart.pinmux_pad1 = EDBG_CDC_SERCOM_PINMUX_PAD1;
    config_usart.pinmux_pad2 = EDBG_CDC_SERCOM_PINMUX_PAD2;
    config_usart.pinmux_pad3 = EDBG_CDC_SERCOM_PINMUX_PAD3;
    stdio_serial_init(&usart_instance, EDBG_CDC_MODULE, &config_usart);
    usart_enable(&usart_instance);
}

static void ecb_mode_test_dma(void)
{
    printf("\r\n-----------------------------------\r\n");
    printf("- 128bit cryptographic key\r\n");
    printf("- ECB cipher mode\r\n");
    printf("- DMA mode\r\n");
    printf("- 4 32bit words with DMA\r\n");
    printf("-----------------------------------\r\n");


    state = false;

    /* Configure the AES. */
    g_aes_cfg.encrypt_mode = AES_ENCRYPTION;
    g_aes_cfg.key_size = AES_KEY_SIZE_128;
    g_aes_cfg.start_mode = AES_AUTO_START;
    g_aes_cfg.opmode = AES_ECB_MODE;
    g_aes_cfg.cfb_size = AES_CFB_SIZE_128;
    g_aes_cfg.lod = false;
    aes_set_config(&aes_instance,AES, &g_aes_cfg);

    /* Set the cryptographic key. */
    aes_write_key(&aes_instance, key128);

    /* The initialization vector is not used by the ECB cipher mode. */

    dma_start_transfer_job(&example_resource_tx);
    aes_set_new_message(&aes_instance);
    aes_clear_new_message(&aes_instance);

    /* Wait DMA transfer */
    while (false == state) {
    }

    /* Wait for the end of the encryption process. */
    while (!(aes_get_status(&aes_instance) & AES_ENCRYPTION_COMPLETE)) {
    }

    state = false;
    dma_start_transfer_job(&example_resource_rx);

    /* Wait DMA transfer */
    while (false == state) {
    }

    if ((ref_cipher_text_ecb[0] != output_data[0]) ||
            (ref_cipher_text_ecb[1] != output_data[1]) ||
            (ref_cipher_text_ecb[2] != output_data[2]) ||
            (ref_cipher_text_ecb[3] != output_data[3])) {
        printf("\r\nKO!!!\r\n");
    } else {
        printf("\r\nOK!!!\r\n");
    }

}

static void transfer_tx_rx_done(struct dma_resource* const resource )
{
    state = true;
}

static void configure_dma_aes_wr(void)
{
    struct dma_resource_config tx_config;
    dma_get_config_defaults(&tx_config);

    tx_config.peripheral_trigger = AES_DMAC_ID_WR;
    tx_config.trigger_action = DMA_TRIGGER_ACTON_BLOCK;

    dma_allocate(&example_resource_tx, &tx_config);

    struct dma_descriptor_config tx_descriptor_config;

    dma_descriptor_get_config_defaults(&tx_descriptor_config);

    tx_descriptor_config.beat_size = DMA_BEAT_SIZE_WORD;
    tx_descriptor_config.dst_increment_enable = false;
    tx_descriptor_config.block_transfer_count = AES_EXAMPLE_REFBUF_SIZE;
    tx_descriptor_config.source_address = (uint32_t)ref_plain_text + sizeof(ref_plain_text);
    tx_descriptor_config.destination_address =(uint32_t) &(AES->INDATA);
    dma_descriptor_create(&example_descriptor_tx, &tx_descriptor_config);

    dma_add_descriptor(&example_resource_tx, &example_descriptor_tx);
}

static void configure_dma_aes_rd(void)
{

    struct dma_resource_config rx_config;

    dma_get_config_defaults(&rx_config);

    rx_config.peripheral_trigger = AES_DMAC_ID_RD;
    rx_config.trigger_action = DMA_TRIGGER_ACTON_BLOCK;

    dma_allocate(&example_resource_rx, &rx_config);

    struct dma_descriptor_config rx_descriptor_config;

    dma_descriptor_get_config_defaults(&rx_descriptor_config);

    rx_descriptor_config.beat_size = DMA_BEAT_SIZE_WORD;
    rx_descriptor_config.src_increment_enable = false;
    rx_descriptor_config.block_transfer_count = AES_EXAMPLE_REFBUF_SIZE;
    rx_descriptor_config.source_address = (uint32_t)&(AES->INDATA);
    rx_descriptor_config.destination_address =
        (uint32_t)output_data + sizeof(output_data);

    dma_descriptor_create(&example_descriptor_rx, &rx_descriptor_config);

    dma_add_descriptor(&example_resource_rx, &example_descriptor_rx);
}
Add to user application initialization (typically the start of main()):

    /* Initialize the system and console*/
    system_init();
    configure_usart();

    /* Configure AES DMA and enable callback */
    configure_dma_aes_wr();
    configure_dma_aes_rd();

    dma_register_callback(&example_resource_tx, transfer_tx_rx_done,
            DMA_CALLBACK_TRANSFER_DONE);
    dma_enable_callback(&example_resource_tx, DMA_CALLBACK_TRANSFER_DONE);

    dma_register_callback(&example_resource_rx, transfer_tx_rx_done,
            DMA_CALLBACK_TRANSFER_DONE);
    dma_enable_callback(&example_resource_rx, DMA_CALLBACK_TRANSFER_DONE);

    aes_get_config_defaults(&g_aes_cfg);
    aes_init(&aes_instance,AES, &g_aes_cfg);

    aes_enable(&aes_instance);