Usage

  1. 1.

    Build the program, and download it onto the evaluation board.

  2. 2.
    On the computer, open, and configure a terminal application (e.g., HyperTerminal on Microsoft® Windows®) with these settings:
    • 115200 baud

    • 8 bits of data

    • No parity

    • 1 stop bit

    • No flow control

  3. 3.

    Start the application.

  4. 4.
    In the terminal window, the following text should appear:
    -- LCDCA Controller Example --
    -- xxxxxx-xx
    -- Compiled: xxx xx xxxx xx:xx:xx --
    
    Press PB0 to stop automated sequential mode and continue.