QDebug Interface: Allows Live streaming of Touch data to QTouch Analyzer.
Delay Cycles:
Delay Cycles determines the Capacitive Charge pulse width duration.
Possible values: 1 to 255 CPU Clock cycles (nops)
For Rs = 1kΩ, Typical pulse time is 1µs,
For Rs = 100kΩ, Typical pulse time is 4 µs
Power Optimization: Used to reduce the power consumed by the library. When power optimization is enabled the Pin Direction and State of unused pins within a Sensor Port can be modified by the QTouch Library during each measurement. Additionally Spread spectrum measurement for improved emissions is also disabled.
Rules & Guidelines:
If debug interfaces that has in-built support in the device (such as TWI Master, SPI Master) and it needs certain dedicated pins, then ensure that those pins are not used for other purposes.
Same port pin cannot be used more than once.