After having selected the different SNS and SNSK ports, the sensors' channels must be assigned specific pins for SNS and SNSK. Use the combo-boxes to select the pins for each sensor's channel. The list of pins available for selection will be dependend on the number of pins provided for each port. This will be dictated by MCU architecture, 8 or 32-bit will correspond to 8 or 32 pins per port.
QTouch Pin Selection Rules:
SNS and SNSK pin pairs must be coupled within the same port pair.
SNS and SNSK port pin pairs are assigned to channels starting from the LSBit of the first SNS port and ending with the MSBit of the second SNS port if two port pairs are used, or the MSBit of the same SNS port if only one port pair is used.
The number of SNS and SNSK pins in a port pair should be equal, when not the port with the fewest available pins sets the maximum number of supported channels for that port pair.
Within a port pair, from LSB to MSB, the first SNS pin must be coupled with the first SNSK pin, the second SNS pin must be coupled with the second SNSK pin and so on.
All the channels for multi-channel sensors, i.e. wheels and sliders, must be allocated within one port pair.