BAUDxCON
Bit7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
ABDOVF | RCIDL | SCKP | BRG16 | WUE | ABDEN | ||
AccessRO | RO | RW | RW | RW | RW | ||
Reset0 | 0 | 0 | 0 | 0 | 0 |
Auto-Baud Detect Overflow bit
Value | Name | Description |
---|---|---|
1 |
SYNC= 0 |
Auto-baud timer overflowed |
0 |
SYNC= 0 |
Auto-baud timer did not overflow |
X |
SYNC= 1 |
Don't care |
Receive Idle Flag bit
Value | Name | Description |
---|---|---|
1 |
SYNC= 0 |
Receiver is Idle |
0 |
SYNC= 0 |
Start bit has been received and the receiver is receiving |
X |
SYNC= 1 |
Don't care |
Synchronous Clock Polarity Select bit
Value | Name | Description |
---|---|---|
1 |
SYNC= 0 |
Idle state for transmit (TX) is a low level (transmit data inverted) |
0 |
SYNC= 0 |
Idle state for transmit (TX) is a high level (transmit data is non-inverted) |
1 |
SYNC= 1 |
Data is clocked on rising edge of the clock |
0 |
SYNC= 1 |
Data is clocked on falling edge of the clock |
16-bit Baud Rate Generator Select bit
Value | Description |
---|---|
1 |
16-bit Baud Rate Generator is used |
0 |
8-bit Baud Rate Generator is used |
Wake-up Enable bit
Value | Name | Description |
---|---|---|
1 |
SYNC= 0 |
Receiver is waiting for a falling edge. Upon falling edge no character will be received and flag RCxIF will be set. WUE will automatically clear after RCxIF is set. |
0 |
SYNC= 0 |
Receiver is operating normally |
X |
SYNC= 1 |
Don't care |