Configuration Summary

  SAM D11D

24-pin QFN

SAM D11D

20-pin SOIC

SAM D11C

14-pin SOIC

Pins 24 20 14
General Purpose I/O-pins (GPIOs) 22 18 12
Flash 16KB 16KB 16KB
SRAM 4KB 4KB 4KB
Timer Counter (TC) instances 2 2 2(3)
Waveform output channels per TC instance 2 2 2
Timer Counter for Control (TCC) instances 1 1 1
Waveform output channels per TCC 8 8 8
DMA channels 6 6 6
USB interface 1 1 1
Serial Communication Interface (SERCOM) instances 3 3 2
Analog-to-Digital Converter (ADC) channels 10 8 5
Analog Comparators (AC) 2 2 2
Digital-to-Analog Converter (DAC) channels 1 1 1
Real-Time Counter (RTC) Yes Yes Yes
RTC alarms 1 1 1
RTC compare values

One 32-bit value or

two 16-bit values

One 32-bit value or

two 16-bit values

One 32-bit value or

two 16-bit values

External Interrupt lines 8 8 8
Peripheral Touch Controller (PTC) channels for mutual capacitance (X-lines x Y lines)

72 (9x8)

42 (7x6)

12 (4x3)

Peripheral Touch Controller (PTC) channels for self capacitance (Y-lines only) 16 13 7
Maximum CPU frequency 48MHz
Packages

QFN

SOIC

SOIC

Oscillators

32.768kHz crystal oscillator (XOSC32K)

0.4-32MHz crystal oscillator (XOSC)

32.768kHz internal oscillator (OSC32K)

32KHz ultra-low-power internal oscillator (OSCULP32K)

8MHz high-accuracy internal oscillator (OSC8M)

48MHz Digital Frequency Locked Lppp (DFLL48M)

96MHz Fractional Digital Phased Locked Loop (FDPLL96M)

Event System channels 6 6 6
SW Debug Interface Yes Yes Yes
Watchdog Timer (WDT) Yes Yes Yes
Note:
  1. 1.The number of X- and Y-lines depends on the configuration of the device, as some I/O lines can be configured as either X-lines or Y-lines.
  2. 2.The number of Y-lines depends on the configuration of the device, as some I/O lines can be configured as either X-lines or Y-lines. The number given here is the maximum number of Y-lines that can be obtained.
  3. 3.The signals for TC2 are not routed out on the 14-pin package.