PORTC

Port C Data Register

When addressing I/O Registers as data space using LD and ST instructions, the provided offset must be used. When using the I/O specific commands IN and OUT, the offset is reduced by 0x20, resulting in an I/O address offset within 0x00 - 0x3F.

Name:: PORTC
Offset:: 0x28
Reset:: 0x00
Access:: When addressing as I/O Register: address offset is 0x08

Bit7	6	5	4	3	2	1	0
PORTC7	PORTC6	PORTC5	PORTC4	PORTC3	PORTC2	PORTC1	PORTC0
AccessR/W	R/W	R/W	R/W	R/W	R/W	R/W	R/W
Reset0	0	0	0	0	0	0	0

Bits 0, 1, 2, 3, 4, 5, 6, 7 – PORTC: Port C Data

Port C Data