PINC – The Port C Input Pins Address

When using the I/O specific commands IN and OUT, the I/O addresses 0x00 - 0x3F must be used. When addressing I/O Registers as data space using LD and ST instructions, 0x20 must be added to these offset addresses.

Name:
PINC
Offset:
0x13
Reset:
N/A
Access:
When addressing I/O Registers as data space the offset address is 0x33
Bit76543210
PINCn[6:0]
AccessRRRRRRR
Resetxxxxxxx

Bits 6:0 – PINCn: Port C Input Pins Address [n = 6:0]

Port C Input Pins Address [n = 6:0]