Voltage References System (VREF) Control
Bit31 | 30 | 29 | 28 | 27 | 26 | 25 | 24 |
Access | |||||||
Reset | |||||||
Bit23 | 22 | 21 | 20 | 19 | 18 | 17 | 16 |
SEL[3:0] | |||||||
Access | R/W | R/W | R/W | R/W | |||
Reset | 0 | 0 | 0 | 0 | |||
Bit15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 |
Access | |||||||
Reset | |||||||
Bit7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
ONDEMAND | RUNSTDBY | VREFOE | TSEN | ||||
AccessR/W | R/W | R/W | R/W | ||||
Reset0 | 0 | 0 | 0 |
Voltage Reference Selection
These bits select the Voltage Reference for the ADC/DAC.
Value | Name | Description |
---|---|---|
0x0 | 1V0 | 1.0V voltage reference typical value |
0x1 | 1V1 | 1.1V voltage reference typical value |
0x2 | 1V2 | 1.2V voltage reference typical value |
0x3 | 1V25 | 1.25V voltage reference typical value |
0x4 | 2V0 | 2.0V voltage reference typical value |
0x5 | 2V2 | 2.2V voltage reference typical value |
0x6 | 2V4 | 2.4V voltage reference typical value |
0x7 | 2V5 | 2.5V voltage reference typical value |
Others | Reserved |
On Demand Control
The On Demand operation mode allows to enable or disable the voltage reference depending on peripheral requests.
Value | Description |
---|---|
0 | The voltage reference is always on, if enabled. |
1 | The voltage reference is enabled when a peripheral is requesting it. The voltage reference is disabled if no peripheral is requesting it. |
Run In Standby
The bit controls how the voltage reference behaves during standby sleep mode.
Value | Description |
---|---|
0 | The voltage reference is halted during standby sleep mode. |
1 | The voltage reference is not stopped in standby sleep mode. If VREF.ONDEMAND=1, the voltage reference will be running when a peripheral is requesting it. If VREF.ONDEMAND=0, the voltage reference will always be running in standby sleep mode. |
Voltage Reference Output Enable
Value | Description |
---|---|
0 | The Voltage Reference output is not available as an ADC input channel. |
1 | The Voltage Reference output is routed to an ADC input channel. |
Temperature Sensor Enable
Value | Description |
---|---|
0 | Temperature Sensor is disabled. |
1 | Temperature Sensor is enabled and routed to an ADC input channel. |