SEQCTRL

Sequence Control

Name:: SEQCTRL
Offset:: 0x28 [ID-0000120e]
Reset:: 0x00000000
Access:: PAC Write-Protection

Bit31	30	29	28	27	26	25	24
SEQENn[31:24]
AccessR/W	R/W	R/W	R/W	R/W	R/W	R/W	R/W
Reset0	0	0	0	0	0	0	0
Bit23	22	21	20	19	18	17	16
SEQENn[23:16]
AccessR/W	R/W	R/W	R/W	R/W	R/W	R/W	R/W
Reset0	0	0	0	0	0	0	0
Bit15	14	13	12	11	10	9	8
SEQENn[15:8]
AccessR/W	R/W	R/W	R/W	R/W	R/W	R/W	R/W
Reset0	0	0	0	0	0	0	0
Bit7	6	5	4	3	2	1	0
SEQENn[7:0]
AccessR/W	R/W	R/W	R/W	R/W	R/W	R/W	R/W
Reset0	0	0	0	0	0	0	0

Bits 31:0 – SEQENn: Enable Positive Input in the Sequence

Enable Positive Input in the Sequence

For details on available positive mux selection, refer to INPUTCTRL.MUXENG.

The sequence start from the lowest input, and go to the next enabled input automatically when the conversion is done. If no bits are set the sequence is disabled.

Value	Description
0	Disable the positive input mux n selection from the sequence.
1	Enable the positive input mux n selection to the sequence.