INTFLAGD

Peripheral Interrupt Flag Status and Clear D

This flag is cleared by writing a '1' to the flag.

This flag is set when a Peripheral Access Error occurs while accessing the peripheral associated with the respective INTFLAGD bit, and will generate an interrupt request if INTENCLR/SET.ERR is '1'.

Writing a '0' to this bit has no effect.

writing a '1' to this bit will clear the corresponding INTFLAGD interrupt flag.

Name:: INTFLAGD
Offset:: 0x20 [ID-00000a18]
Reset:: 0x000000
Access:: –

Bit31	30	29	28	27	26	25	24

Access
Reset
Bit23	22	21	20	19	18	17	16

Access
Reset
Bit15	14	13	12	11	10	9	8

Access
Reset
Bit7	6	5	4	3	2	1	0
CCL	OPAMP	PTC	AC	ADC	TC4	SERCOM5	EVSYS
AccessR/W	R/W	R/W	R/W	R/W	R/W	R/W	R/W
Reset0	0	0	0	0	0	0	0

Bit 7 – CCL: Interrupt Flag for CCL

Interrupt Flag for CCL

Bit 6 – OPAMP: Interrupt Flag for OPAMP

Interrupt Flag for OPAMP

Bit 5 – PTC: Interrupt Flag for PTC

Interrupt Flag for PTC

Bit 4 – AC: Interrupt Flag for AC

Interrupt Flag for AC

Bit 3 – ADC: Interrupt Flag for ADC

Interrupt Flag for ADC

Bit 2 – TC4: Interrupt Flag for TC4

Interrupt Flag for TC4

Bit 1 – SERCOM5: Interrupt Flag for SERCOM5

Interrupt Flag for SERCOM5

Bit 0 – EVSYS: Interrupt Flag for EVSYS

Interrupt Flag for EVSYS