QT600 MCU to Sensor board connections

The QT600 MCU and sensor boards can be used also together with own MCU and sensor boards, for test and evaluation purposes. For instance testing of own sensor boards together with one of the QT600 MCU boards, or testing of own MCU board with any of the QT600 sensor boards.

The QT600 boards use a Samtec Card Edge connector "MEC1-120-02-S-D-RA1-SL". See http://www.samtec.com for detailed information about these connectors.

Figure 1. QT600 sensor board connectors
Pin 1 connects to pin 39, pin 2 connects to pin 40, and so on.


Table 1. QT600 Sensor board to MCU board connections
Sensor Board Connector Pin MCU Board Connector Pin QT600-QT8-PANEL/QT600-ATTINY88-QT8 QT600-QT16-PANEL/QT600-ATXMEGA128A1-QT16 QT600-QM64-PANEL/QT600-ATMEGA324-QM64
2 39 CH0 CH0  
4 37 CH1 CH1 X7
6 35 CH2 CH2 X6
8 33 CH3 CH3 X5
10 31 CH4 CH4 X4
12 29 CH5 CH5 X3
14 27 CH6 CH6 X2
18 25 CH7 CH7 X1
20 23   CH8 X0
22 21   CH9 GND
24 19   CH10 Y0
26 17   CH11 Y1
28 13   CH12 Y2
30 111   CH13 Y3
32 9   CH14 Y4
34 7   CH15 Y5
36 5     Y6
38 3     Y7