There are two squid cables (10pin male header to single wires) included in the kit. The intended use of this special cable assembly is to plug the radio frequency board onto it, and connect the ten single wires to any hardware platform that does not have the standard auxiliary connector available.
PIN | PIN |
---|---|
Pin 1 (Brown): Reset | Pin 2 (Red): Miscellaneous |
Pin 3 (Orange): Interrupt | Pin 4 (Yellow): Sleep Transmit |
Pin 5 (Green): Chip Select | Pin 6 (Blue): Master Out Slave In |
Pin 7 (Purple): Master In Slave Out | Pin 8 (Grey): SPI Clock |
Pin 9 (White): Ground | Pin 10 (Black): Vcc |