Four headers are available on the processor board:
10-pin header (J101): Interface for the radio frequency board.
Three pin header RF (J102 - not mounted): Auxiliary signals that can be patched in from the same three pin header on the radio frequency board. See Table below for pinout.
JTAG Interface (J103 - not mounted): Standard Atmel JTAG header.
Three pin header UART (J105 - not mounted): See Table below for pinout.
Pin | Name |
---|---|
J102-1 | Clock Output |
J102-2 | ID Chip |
J102-3 | Test pin - AT86RF230 |
Pin | Name |
---|---|
J105-1 | GND |
J105-2 | UART TX |
J105-3 | UART RX |