System Information Block

The System Information Block (SIB) can be read out at any time by setting the SIB bit in the KEY instruction from KEY - Set Activation KEY. The SIB provides a compact form of providing information for the debugger which is vital in identifying and setting up the proper communication channel with the part. The output of the SIB should be interpreted as ASCII symbols. KEY size field should be set to 16byte when reading out the complete SIB, and 8 byte size can be used to read out only the Family_ID. See Figure 1 for SIB format description, and which data that is available at different readout sizes.
Figure 1. System Information Block format