CTRLESET

Control Register E Set - Split Mode

The individual status bit can be set by writing a '1' to its bit location. This allows each bit to be set without use of a read-modify-write operation on a single register.

Each Status bit can be read out either by reading TCA.CTRLESET or TCA.CTRLECLR.

Name:: CTRLESET
Offset:: 0x05
Reset:: 0x00
Access:: -

Bit7	6	5	4	3	2	1	0
				CMD[1:0]
Access				R/W	R/W
Reset				0	0

Bits 3:2 – CMD[1:0]: Command

Command

These bits are used for software control of update, restart, and reset of the timer/counter. The command bits are always read as zero.

Value	Name	Description
0x0	NONE	No command
0x1	UPDATE	Force update
0x2	RESTART	Force restart
0x3	RESET	Force hard Reset (ignored if TC is enabled)