Add J-Link over IP

In the Add target dialog, it is possible to add a remote Segger J-Link debug probe. Both using a debug probe with built-in ethernet such as the J-Link PRO1 and any other Segger probe by using the J-Link Remote Server software2.

Figure 1. Add J-Link over IP

To add a debug probe that is connected to a J-Link Remote Server, choose Connect by hostname and enter the IP address or the hostname of the computer running the J-Link Remote Server. If the J-Link Remote server is running on a non-standard port3 then the port also needs to be entered. If the J-Link Remote Server is running on the default port, the port can be left empty.

To add a debug probe that has built-in ethernet, choose Connect by serial number in the Add target dialog, and enter the serial number of the debug probe.

1 See
2 See
3 The standard port of the J-Link Remote Server is port 19020